CPU Support |
- Supports Intel® LGA775 Core™ 2 Quad/Core™ 2 Duo/Pentium® 4/Pentium® D/Celeron® D processors
- Intel® Embedded Processors List (Intel® Longevity CPU)”Intel® Core™ 2 Quad Processor QP400 Intel® Core™ 2 Duo Processor E7400 & E5300 & E6400 & E4300 & E2160 Intel® Pentium® 4 Processor 651 & 551 & 531 Intel® Celeron® D Processor 352 & 341 Intel® Celeron® Processor 440
- 533/800/1066 MHz System Bus
|
Main Memory |
- 2 x DIMM, support Dual channel SDRAM DDR3 memory up to 4GB, FSB 1066/800MHz
- Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource allocation
|
Chipset |
- Intel® G41 Graphics Memory Controller Hub (GMCH)
- Intel® ICH7/ICH7R I/O Controller Hub
|
BIOS |
- Award System BIOS
- Plug & Play support
- 8M-bit flash ROM
|
On-board LAN |
- 2 x Intel® 82574L PCI Express Gigabit Ethernet LAN
- 2 x RJ45 with LED
- Supports Boot From LAN (PXE)
- Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only)
|
Display |
- Intel® G41 GMCH Integrated
- CRT: 1 x DB15 VGA connector
|
I/O Interface |
- USB 2.0: 6 ports, 2 ports through I/O bracket, 4 ports through 1x6 JST
- Serial port: 2 ports, with 2x5 box header(2.0mm) , supports RS232 only
- Parallel port: 1 port, with 2x13 box-header(2.0mm)
- PS2: 1 x 6-pin JST connector(2.0mm) for KB/Mouse
- Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH
- 2-pin header for SMB; 2-pin header for reset; 2-pin headerfor power on switch
- 2-pin header for power LED; 2-pin header for HDD LED
- I/O on bracket:1 x DB15 VGA connector_2 x RJ45 GbE port_1 x PS2
|
Storage |
|
Watchdog Timer |
- Watchdog timeout can be programmable by Software from 1 second to 255 seconds
- Tolerance 15% under room temperature 25°C
|
On-board RTC |
- On-chip RTC with battery backup
- 1 x External Li Battery
- Torrance less than 2sec (24 hours) under 25˚C
|
ISA Support |
- Through PCI to ISA Interface (ITE 8888)
- No ISA Master Devices but ISA DMA Devices
- Maximize ISA Slot support up to 3
|
System Monitor |
- 4 voltage (For +3.3V, +5V, +12V, Vcore)
- 3 Temperatures (CPU, two external Temperature Sensor)
- 3 FANs speed (CPU, System and MCH FANs)
|
Power Input |
- Power source from backplane through PCI/ISA Golden Finger
- Supports both AT or ATX Power Supplies(Automatically, BIOS default :AT Mode)
- When change to ATX, the BIOS default setting is as follow:POWER -SUPPLY TYPE--> [ATX] AUTO PWR-FAILURE RESUME -->[ON]
- +3.3V is Converted from +5V and not directly from Backplane or Power Supply
- +5Vsb (Standby power) is connected from Backplane through 3pins Connectors
- 4 Pins +12V Power Input Connector
|
Dimensions |
- 338.58mm (L) x 122mm (W) (13.3" x 4.8")
|
Environment |
- Board level operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 85°C
- Relative humidity: 10% to 90% (Non-condensing) Non-operating 5% to 95%, non-condensing
|
Certifications |
|